IQ Builders

How to estimate an interior painting job from a plan

An interior painting estimate comes down to three numbers: the area you'll paint, the paint it takes, and the hours your crew needs. A floor plan gives you the first two. Your own past jobs give you the third.

Step 1: Wall area, room by room

Measure the walls of each room on the floor plan and multiply by the ceiling height. Work room by room: colors and sheens often change from one room to the next, and a per-room list lets the customer see what each room costs. A 12 × 12 ft bedroom with 8 ft walls has 48 linear ft of wall and 384 sq ft of wall area.

Many painters don't deduct standard doors and windows from the wall area, and price the trim around them separately. Deduct large openings and window walls.

Step 2: Ceilings

A flat ceiling has the same area as the room's floor: 144 sq ft for the bedroom above. Price ceilings as their own line, since they often use a different paint and a different production rate.

Step 3: Gallons

Most interior wall paints list roughly 350 to 400 sq ft per gallon per coat on smooth, primed drywall. Textured and porous surfaces take more paint, and primers usually cover less. Use the coverage on the product's data sheet:

gallons = area × coats ÷ coverage per gallon

For 3,200 sq ft of walls, two coats, at 350 sq ft per gallon: 3,200 × 2 ÷ 350 = 18.3, so 19 gallons. New drywall needs a primer coat first, and a big color change on a repaint often needs a tinted primer or an extra coat.

Step 4: Doors, trim and everything else

Count doors and windows, and measure base, casing and crown in linear feet. Give each its own line and rate: doors per side or per door, trim per linear foot. Add what the plans don't show but the walkthrough did, such as stair rails, built-ins and closet shelving.

Step 5: Labor from your own production rates

Labor is usually the largest part of a painting price, and it's where estimates go wrong. Use production rates from your own jobs: square feet per hour for walls and ceilings, linear feet per hour for trim, doors per hour. Add prep time for masking, patching and caulking, and for moving furniture on occupied jobs. If you don't track rates yet, start on your next job by logging hours by task and by room.

Check it before it goes out

Doing it in IQ Builders

The takeoff has ready-made items for painting: wall and ceiling areas, base, casing and crown in linear feet, and door and window counts. Upload the PDF plans, set the scale by clicking two points on a known dimension, and measure room by room. The quantities go into the estimate's line items, the customer approves the estimate online, and you turn the approved estimate into an invoice. Manual measurement is part of the Ultimate plan.

With the AI Takeoffs add-on, available on any paid plan, the AI counts the doors and windows and marks each one on the plan. You confirm the marks before they go into the estimate. Estimates and invoices are free on the Starter plan. See pricing.

Quick reference

ItemRule of thumb
Wall arearoom perimeter × ceiling height
Ceiling arearoom floor area for flat ceilings
Coverageabout 350–400 sq ft per gallon per coat on smooth, primed drywall; use the product's data sheet
Gallonsarea × coats ÷ coverage per gallon
Trimbase, casing and crown in linear ft; doors per side or per door
Laboryour own production rates, plus prep

New to measuring from PDFs? Start with how to do a construction takeoff from a PDF plan. Prefer a spreadsheet? Use the free estimate template.

More trade guides: drywall, framing, electrical.

Try IQ Builders free